A123 1100mAh 6S1P LiFePO4 Battery Pack

A123 1100mAh 6S1P LiFePO4 Battery Pack

DETAILS:
 6-cell 9.9V A123 battery pack using genuine A123 Systems LiFePO4 cells, complete with JST-XH balance connector and female Deans Ultra plug.
This pack consists of six cells in total. Three cells are wired in series and connected in parallel to three additional series-wired cells to give a 6S1P pack with a total capacity of 4600mAh. The pack should be charged as a 6-cell pack.
The pack layout is 2*2*2 (Refer to image).
This pack can be charged at a maximum of 10 amps through the Deans Ultra plug but should be balanced regularly for a long service life. A LiFePO4 compatible battery charger must be used, such as the Graupner Ultramat 14 Plus.
Nominal pack voltage:                  19.8 V
Fully-charged pack voltage:          21.6V
Recommended cut-off voltage:     15V (2.5V per cell)
Minimum voltage:                         12.0V (2.0V per cell)
Do not charge above   21.6V.

SPECIFICATIONS:
Capacity (mAh):                         1100
Dimensions (mm):                       203x22x38
Pack Configuration:                    6S1P
Balance Plug:                             Yes
Balance Plug Type:                     PolyQuest
Continuous Discharge (C)           30.0C
Continuous Current (A):             33.0A
Burst Discharge (C):                  60.0C
Burst Current (A):                      66.0A
Maximum Charge Rate (C):       4.3C
Maximum Charge Rate (A):       5.0A
Discharge Plug:                          Yes
Chemistry:                                 LiFePO4
Weight:                                     297g
 

WE CAN ASSEMBLE BATTERY PACKS ACCORDING TO YOUR CONFIGURATIONS. CUSTOM DESIGN WELCOME!